Nice Info About How To Clean Motorcycle Forks

After that, unscrew the rebound adjusters.

How to clean motorcycle forks. Seems like the previous owner left a harsh cleaner on the forks and they were etched. Flush with clean water and blow dry. I try out some new compounds w.

The easy way to make your motorcyle front end look new again How can i clean these forks? Polishing your motorcycle front forks regularly is very important to keep your bike in top shape.

Please consult your shop manual for correct application of this information to your individual. It is best to clean the seals on both sides at the same time. Bike maintenance and kit care.

This is a basic video on how to clean and service motorcycle fork seals and dust swipers. Note that dirt, grime and even insects could get lodged in the forks of your bike so make sure you remove all these things regularly to protect the front forks of your bike from damage. What do you use to clean out the fork tubes?

Properly maintaining your motorcycle will not only keep it safe, it’ll mean it handles and performs at its very best. Disassemble the forks — remove the dust cap, the retainer clip, undo the bolts holding it together, and then pull it apart to remove the fork seal The next step in cleaning under fork seals is to remove the fork bushes.

Chrome & air filter care; What's the best solvent to use to flush really old nasty fork oil out of your forks before a refill? Best to leave that little bit of gunk at the bottom right where it is.

This will give you access to the inner workings of the forks. Make sure to securely support the motorcycle and remove the fork caps. This will allow you to access the damper rods.

Say goodbye to dirt and grime for optimal performance on the road. Normally i just drain the fork oil out and refill, but the fork oil that just came out of my '71 honda cl100s was really nasty and dirty. Once the inside of the forks is clean, it is time to focus on the outside.

Regular cleaning and maintenance of motorcycle forks is crucial for optimal performance. Depending on the size of the forks, it may be necessary to compress and release the tool. I have heard some use kerosene, but it seems kersosene always leaves a oily residue when i use it on other stuff.

494k views 11 years ago. Trying to flush it out with a little bit of oil only drags it up where it will cause trouble. Use a mild cleaner and soft cloth to wipe down fork tubes and sliders.